Optoelectronics
N & A (International) Limited -
Manufacturers passive fibre optics
products including ferrules, capillaries, sleeves, connectors,
adaptors, convertors, attenuators, glass v-grooves, metalized fibre
and pigtails.
*N & A (International) Limited
14 The Courtyards, Hatters Lane
Croxley Business Park
Watford WD18 8YH
UK
Tel: +44 (0) 1923 228816
Fax: +44 (0) 1923 211001
E-mail: sales@nanda.co.uk
http://www.adamantconnect.com
#
ASAS GmbH - Manufacturer of infrared sensors, communication systems
and components for traffic, automation and conveyors.
The central theme of ASAS: Sustained success by making an effort and
introducing innovations.
The company was established in 1994 and has its registered offices in
Blumberg near Berlin. ASAS develops and manufactures its own products
and components and covers the relevant niches in the communications
technology and security market. ASAS does not merely want to satisfy
its customers, it would also like to positively surprise them by
speedily implementing its practice-oriented ideas and solutions, i.e.
customized solutions that are exactly geared to our customers'
demands.
ASAS has a wealth of experience and the most advanced know-how in the
field of infrared communications, infrared sensor engineering and
communications technology to meet this challenge.
ASAS offers you a sound and long-standing co-operation that is
characterized by mutual trust.
*ASAS - Analoge Spektral
Anwendungs Systeme GmbH
Henry-Kruse-Str. 1
D-16356 Blumberg bei Berlin
Germany
Tel: +49 33394 / 518 - 0
Fax: +49 33394 / 518 - 90
E-mail: info@asasgmbh.com
http://www.asasgmbh.de/en/index_e.htm
#
Avalon Photonics Ltd. - Develops and manufacture semiconductor high
speed vertical cavity surface emitting laser (VCSEL) arrays and other
optoelectronic products. From Switzerland.
Avalon Photonics is a venture-capital funded optoelectronics company
with headquarters in Zurich, Switzerland, as a spin-off from the Swiss
Center for Electronics and Microtechnology, CSEM, in the year 2000.
The company pioneered the development of single- and multimode
Vertical Cavity Surface Emitting Lasers (VCSELs) and VCSEL arrays for
applications in optical communication and sensing applications.
Avalon’s product range covers bare dies, chip-on-submounts, TO-cans as
well as standard and customized optical subassemblies, supporting data
rates of up to 10 Gbps and beyond. Its patented singlemode VCSEL
technology allows the mass-fabrication of highly reliable
semiconductor laser sources with ultra-low power consumption, thus
enabling innovative solutions such as optical oxygen sensing, atomic
clocks, high resolution optical encoders, and other advanced
spectroscopic applications.
With our high quality standard as well as our efficient global supply
chain management, we are able to provide products and services with
the best cost -performance ratio.
*Avalon Photonics
Badenerstrasse 569
CH-8048 Zürich
Switzerland
Tel: +41 1 498 1411
Fax: +41 1 498 1412
E-mail: info@avap.ch
http://avalon.ch
#
Bentham - Manufacture systems used in the study and measurement of
light.
Bentham Instruments has a world-wide reputation in electro-optics
built up over 25 years. We manufacture and supply standard and custom
systems used in the study and measurement of light. Our customers
include the Research and Development departments of large
corporations, small companies, government-funded institutes and
universities.
*Bentham Instruments Ltd
2 Boulton Road
Reading, Berkshire
RG2 0NH
UK
Tel: +44 (0) 118 975 1355
Fax: +44 (0) 118 931 2971
E-mail: info@bentham.co.uk
http://www.bentham.co.uk
#
Bookham Technology - Manufactures integrated optical components in
silicon via ASOC: transceiver modules and receivers, DWDM and sensor
applications.
Bookham is one of the world’s largest manufacturers of components
modules and subsystems for optical networks.
Over the past few years we have worked hard to build a company capable
of delivering cost effective high performance solutions to global
network suppliers.
Recent acquisitions have further enhanced both our product portfolio
and global capability and our relentless focus on automated
manufacturing and technical innovation together with our financial
independence are the drivers for our future success.
*Bookham Technology
UK
Tel: +44 (0) 1235 837000
Fax: +44 (0) 1235 837201
E-mail: sales@bookham.com
rfsales@bookham.com
http://www.bookham.com
#
Datasensor S.p.A. - Manufacture of photoelectric devices for
detection, safety, measurement and inspection for industrial
automation.
DATASENSOR SpA, present on the international market for over 30 years
and with DATALOGIC brand until 1999, is the Italian leader in the
development, production and commercialisation of photoelectric devices
for detection, safety, measurement and inspection for industrial
automation.
The specialisation of the company in the development of components for
automatic machinery has led to its growth and now satisfies all the
automation needs in the manufacturing industry, packaging and packing,
automatic materials handling. Consequently, DATASENSOR can boast an
unique experience, further consolidated as a problem solver,
representing one of its main competitive advantages.
DATASENSOR products are present worldwide by the sales offices, as
well as a qualified distribution network. They are also present as
brand label products by the most important international companies
operating in the Industrial Automation.
*Datasensor SpA
Via Lavino 265
4005 Monte San Pietro
Bologna
Italy
Tel: +39 051 6765611
Fax: +39 051 6759324
E-mail: sales@datasensor.com
http://www.datasensor.com
#
Detection Technology, Inc. - Manufacturer of high-performance
photodiodes, radiation detectors and detector modules.
Detection Technology designs, manufactures, and markets unique, high
performance silicon photodiodes, radiation detectors, their related
electronics, and detector modules. These "eyes of the measurement
instruments" provide excellent accuracy and reliability while offering
the benefits of the modern solid-state technology.
Detection Technology has state-of-the-art production facilities in
northern Europe and in the Far East. These facilities are equipped
with the latest technology, and are capable of manufacturing both
small prototype series and high-volume products. Modern clean-rooms
are designed especially for company's unique ultra-clean manufacturing
process.
Detection Technology's quality system is ISO 9001 certified by Lloyd's
Register Quality Assurance (www.lrqa.com) since May 2000.
*Detection Technology, Inc.
Micropolis, FIN-91100 Ii
Finland
Tel: +358 8 553 6600
Fax: +358 8 553 6611
E-mail: info@deetee.com
http://www.deetee.com
#
Forge Europa Ltd. - Manufacture of visible and infrared optoelectronic
components, custom LED interlocking displays, SMDs, dot matrix,
bargraphs and high intensity discretes.
Forge Europa is an independent company specialising in the design,
development, manufacture and supply of high performance visible and
infrared optoelectronic components.
The company's international headquarters is in Ulverston, UK and our
Asian office coordinates volume production in the Pacific Rim where
products are manufactured to strictly monitored specifications and
standards.
Quality is central to the philosophy of Forge Europa and this extends
to all facets of the organisation.
Our product range is stringently tested and monitored to ensure long
term high quality performance.
A continuous development programme ensures that products are
constantly reviewed and updated to reflect technological advances and
improvements in manufacturing standards.
*Forge Europa Ltd.
The Old Railway
Princes Street
Ulverston
Cumbria
LA12 7NQ
UK
Tel: +44 (0) 1229 580000
Fax: +44 (0) 1229 586890
E-mail: sales@forge-europa.co.uk
http://www.forge-europa.co.uk
#
Gigahertz - Optik Inc. - Manufacturer of optometers, detectors,
filters, input devices, integrating spheres and associated
accessories.
Gigahertz-Optik GmbH began as a representative for international
electro-optics manufacturers in 1986. From inception, our main
application areas have been the
Measurement of light and optical radiation
Measurement with light and optical radiation
Electro-optical and optical components.
Soon our customers began requesting additional services for the
products and instruments we were distributing. The most common and
important request was for local calibration services. This led to the
set-up of our calibration laboratory for optical radiation quantities,
which is accredited by the DKD (Deutscher Kalibrierdienst) and the
German National Laboratory PTB (Physikalisch-Technische
Bundesanstalt). This accreditation (registration number DKD-K-10601),
includes the measurement quantities of Spectral Irradiance and
Spectral Responsivity. As part of this, our laboratory is EN 45001
certified ensuring the best possible reliability, repeatability and
reproducibility of our instruments and calibration services.
In 1998 we started designing and producing our own line of Optometers,
detectors, filters, input devices, integrating spheres and associated
accessories which we think now represents one of the best and complete
programs available. Together with our combined work experience of over
ninety years in the business, we present ourselves as an ideal partner
for all kinds of light and optical radiation measurement applications.
Whether you are looking for a simple luxmeter, an OEM supplier or
fully customized equipment & services, we can help you with your
application while staying within your budget.
In 2001, we opened our U.S. subsidiary, Gigahertz-Optik Inc., in
Newburyport, Massachusetts, to offer these same high levels of quality
products and services to our U.S. and Canadian customers as we do here
in Europe.
*Gigahertz - Optik GmbH
Postfach 1445
82170 Puchheim
Germany
Tel: +49 (0) 89 890159 - 0
Fax: +49 (0) 89 890159 - 50
E-mail: info@gigahertz-optik.de
http://www.gigahertz-optik.com
#
HighWave Optical Technologies - Manufacturers fiberoptic components,
EDFAs and specialty fibers.
Highwave Optical Technologies is committed to bringing a maximum
support and service
to leading system companies. Our philosophy is based on being a
strategic partner, working with
and for our customers to produce optical, mechanical, and electronic
solutions.
*Highwave Optical Technologies
Rue Paul Sabatier
22302 Lannion Cedex
France
Tel: +33 2 96 04 20 00
Fax: +33 2 96 04 20 05
E-mail: sales@highwave-tech.com
http://www.highwave-tech.com
#
IBSEN - Manufactures and markets micro-optical and optoelectronic
products for the growing markets within the telecommunications and
sensor industries.
Ibsen Photonics is improving manufacturability of grating based
optical components through the Ibsen Phase masks and increasing
flexibility and reducing operational costs in telecommunications Dense
Wavelength Division Multiplexing (DWDM) markets through our unique
grating based DWDM modules.
Ibsen Photonics is a leading manufacturer of holographic Phase masks -
a strategic tool for manufacturers of Dense Wavelength Division
Multiplexing (DWDM) telecommunication componenets like fiber Bragg
gratings, DFB lasers and integrated optics.
Leveraging more than 10 years experience in diffractive optics Ibsen
Photonics is developing unique DWDM modules based on our Ibsen
Diffractor technology platform.
*Ibsen Photonics A/S
Ryttermarken 15-21
DK-3520 Farum
Denmark
Tel: +45 44 34 70 00
Fax: +45 44 34 70 01
E-mail: info@ibsen.dk
http://www.ibsen.dk
#
IR Microsystems - Manufactures uncooled IR detector arrays (1-20
microns).
IR MICROSYSTEMS fabricates novel, low-cost, rugged and simple infrared
detection subsystems to accurately analyze the components of gases,
liquids and solids. Together with our OEM customers we provide
solutions for in-line and on-site process control in many industrial
sectors like chemical engineering, petro-chemistry, medical
technology, biotechnology, nutrition and agriculture.
We offer solutions for infrared detection at various degrees of
integration - starting from simple detector units up to spectrometry
subsystems with complete proprietary analog/digital read-out
electronics and interface, capable of delivering a full infrared
spectrum over a pre-defined wavelength range.
State-of-the-art thin film technology allows fabricating our linear
detectors arrays of 16 to 128 pixels at very reasonable cost - even
for small, customized series. Their very high signal-to-noise level at
ambient temperature allows us to offer simple systems, which do not
need additional cooling, making them high-performance devices for the
un-cooled detection of infrared light in the wavelength range of 1 -
20 µm.
The cornerstone of our product line is the microray series, where
the detector arrays are integrated with a proprietary CMOS ASIC for
digital signal output.
By combining the ®µray technology with linear variable filters
(LVF's), we are able to offer low-cost infrared spectrometry
subsystems. These LVF spectrometers form a single, rugged unit without
any adjustable parts and take complete infrared spectra in the
wavelength region defined by the LVF (e.g. 1.4-2.4 µm, 3-5 µm or 8-14
µm). The LVF spectrometer is the perfect tool for on-site process
monitoring applications.
In the field of process control tools, the ®IR MICROSYSTEMS products
allow the OEM customer to significantly improve his offering. Cost
effectiveness, un-beatable price/performance ratio, system simplicity
and size, translate directly into higher end-customer benefit,
resulting in access to entirely new market segments.
*IR microsystems
Bert Willing
PSE-C
1015 Lausanne
Switzerland
Tel: +41 21 693 85 28
Fax: +41 21 693 85 29
E-mail: info@ir-microsystems.com
http://www.ir-microsystems.com
#
Jenoptik AG - Germany. Manufacturing group involved in wide range of
opto-electronic, biotechnology, and telecommuncation products and
applications. Site provides corporate and subsidiary information,
including interest in venture capital projects.
*Jenoptik AG
Carl-Zeiss-Straße 1
D-07743 Jena
Germany
Tel: +49 3641 65-0
Fax: +49 3641 42 45 14
E-mail: info@jenoptik.com
http://www.jenoptik.com
#
LEDer Lighting Ltd. - Manufacturer of LED lighting modules for
commercial, domestic and marine use, incorporating mains, battery and
solar-power electronics.
LEDer was established in July 2001 with the express purpose of
exploiting the full potential of LED lighting and combining this
technology with sources of renewable energy.
With the world increasingly concerned about the use of energy,
particularly the production of electricity by the burning of fossil
fuels and the consequent problems associated with greenhouse gas
emissions, the ideal time had arrived to examine the twin technologies
of renewable energy and energy efficient products.
LEDer was established with the sole purpose of combining the best
attributes of all new technologies with a management team selected
from people with substantial experience in research & development,
manufacturing and commerce.
The brief to LEDer was to examine sources of renewable and
sustainable energy and design, develop and market a range of energy
efficient products, including lighting using white and coloured high
intensity LED's as the source of light.
Using state-of-the-art high output white LED technology,LEDer lighting
and solar panel technology have proved an ideal combination, enabling
LEDer to fulfill existing market requirements for energy efficiency in
lighting and the development of new electronic solutions for lighting
and power sources that will be required for future high-tech
electronics such as communications and computing.
LEDer is working closely with a number of Universities, organisations
and companies in the areas of renewable and sustainable energy
supplies, energy efficient technologies and the ultimate reduction in
greenhouse gas emissions. LEDer is actively involved in the
development of these technologies on a world-wide basis, especially
considering the practical benefits to third world countries.
*LEDer Lighting Ltd.
Unit 4, Rollo Road
Hextable
Nr. Swanley
Kent
BR8 7RD
UK
Tel: +44 (0) 1322 667754
Fax: +44 (0) 1322 664742
E-mail: enquiries@leder.co.uk
technical@leder.co.uk
http://www.leder.co.uk
#
Logitech Ltd - Manufacturing a range of precision sawing, lapping and
polishing equipment for applications in semiconductors, optics, fibre
optics, lasers, electro-optics, geological sciences .
Logitech is a world leader in materials shaping and surface finishing
technology. Since 1965, Logitech has been providing unique and
innovative materials processing solutions for a wide range of
applications, including: Semiconductors, Optics, Fibre Optics, Lasers,
Electro-Optics, Geological Sciences and other applications such as
those used for Ceramics and metals.
Logitech's high-precision cutting, lapping and polishing equipment is
specifically designed to produce thin, flat, parallel and highly-
polished components. Not only does Logitech manufacture a range of
products to suit any applications requirement, we also ensure that we
keep close to our research routes by continuing to develop our
expertise in all aspects of our business. A fundamental part of this
approach involves technology transfer. This is delivered through the
provision of hands-on training and expert after sales support.
Although the company designs and manufactures a range of precision
sawing, lapping and polishing equipment, there is a significant
involvement in materials processing. Applications for such equipment
therefore lie anywhere there is a need for high specification surface
finishes prepared with precise geometric accuracy.
*Logitech Ltd
Erskine Ferry Road
Old Kilpatrick, Glasgow
G60 5EU
Scotland
UK
Tel: +44 (0) 1389 875444
Fax: +44 (0) 1389 879042
E-mail: info@logitech.uk.com
http://www.logitech.uk.com
#
Micropto S.r.l. - Manufacture phototransistors, photodiodes, shaft
encoders disks, special sensors, silicon microelectronic and
optoelectronic devices.
Micropto S.r.l. is projecting, studying, developing and selling micro
and optoelectronic products, working in various range of application
fields, both industrial sensoristic activity and telecomunications
too, both LED emytters and VCSEL and LASERs too, both optical filters
to custom lens.
Our first goal is giving reality to our customer ideas by a concrete
and effectivness project development and deployment. Customer and
market cares are the best known guide to improve our efforts in
increasing quality and in creating new products for new customers.
This is possible for the very high experience of Micropto Human
Resources.
Micropto is a consulting and engineering company where micro and
optoelectonic devices are studied, developed, tested and deployed.
Leading new technologies and a global sourcing policy are the main
pillors of the company.
Micropto main goal is to enrich optoelectronics products with new
electro-optical sensors, new packages and new solutions (Micropto
special line driver, pin to pin compatible to competitors solutions),
plastic lens ad hoc, discs for photoetching encoders ...
*Micropto S.r.l.
Via M. Melloni, 10
20129 Milano
Italy
Tel: +39 02 76011848
Fax: +39 02 76408519
E-mail: welcome@micropto.com
http://www.micropto.com
#
NKT Integration A/S - Manufacture of advanced integrated silica-on-
silicon optical components for optical telecommunication networks.
NKT Integration A/S has over 10 years experience in the manufacturing
of advanced integrated optical components for optical
telecommunication networks. The manufacturing platform is centered
around the well-known PECVD based semiconductor industry processes,
which have been uniquely adapted for processing of silica-on-silicon
material. NKT Integration has used this platform to produce state-of-
the-art Planar Lightwave Circuit (PLC) components.
The NKT group has merged its businesses, IONAS and CISILIAS to create
NKT Integration. By leveraging the well established silica-on-silicon
PECVD process, the installed volume manufacturing foundry capability
of IONAS and CISILIAS Erbium Doped Waveguide Amplifier (EDWA)
technology, NKT Integration is uniquely positioned to provide not only
pure foundry services and standard products but also revolutionary new
solutions, which combine active, passive and amplification
functionality on a single optical chip.
*NKT Integration A/S
Blokken 84
DK-3460 Birkerød
Denmark
Tel: +45 4590 3000
Fax: +45 4590 3001
E-mail: info@nktintegration.com
sales@nktintegration.com
http://www.nktintegration.com
#
NTB - Manufacturer of digital x-ray cameras for medical diagnostic,
non destructive testing (NDT), security systems, food inspection, and
similar applications.
*NTB GmbH
Lange Str. 19
49356 Diepholz
Germany
Tel: +49 5441 99 26 16
Fax: +49 5441 99 26 26
E-mail: ntb@ntbxray.com
http://www.ntbxray.com
#
Opto Speed SA - Switzerland. Manufactures broad range of
optoelectronic components. Includes amplifiers, photodetectors, fibre
arrays, lasers, and receivers. Site incorporates product descriptions
and downloadable data sheets.
Opto Speed is a developer, manufacturer and marketer of high-value-
added optoelectronic chips and modules for the communication, test &
measurement, medical and defense markets. It was established in 1995
and has more than 20 years of expertise in InP technology and product
design due to a transfer from the ETH Zurich and Deutsche Telekom’s
Optoelectronic Group. Opto Speed offers a comprehensive suite of high-
speed products such as FP and DFB lasers, photodetectors, optical
front-ends, SOAs and superluminescent diodes, designed to support 622
Mb/s, 1.25 Gb/s, 2.5 Gb/s, 10 Gb/s and 40 Gb/s applications within
communication networks. The products are offered both as chips as well
as packaged modules (TO, xOSA, mini DIL, DIL, Butterfly and FlatPak).
Opto Speed completed a ?30 million financing round in October 2002.
*Opto Speed Zürich AG
Moosstrasse 2
CH-8803 Rüschlikon
Switzerland
Tel: +41 1 704 62 62
Fax: +41 1 704 62 64
E-mail: sales@optospeed.com
marketing@optospeed.com
http://www.optospeed.ch
#
Pholatec Ltd - Manufacturer of image printing systems. Enlargers with
contrast compensation, microfilm x-ray and color microfilm cameras.
PHOLATEC LTD founded in 1985 is manufacturing cathode ray tube
scanner image printing systems, such as aerial printers, x-ray
reducers, color microfilm cameras and enlargers.
In addition to supporting its own Customer, Pholatec is the source of
service and sales for EGOLTRONICS (ex LogEtronics) products in Europe.
*Pholatec Ltd
P.O. Box
Schulstrasse 36
CH 8952 Schlieren - Z?rich
Switzerland
Tel: +41 (0) 1 730 67 77
Fax: +41 (0) 1 730 67 05
E-mail: pholatec.com@pholatec.com
http://www.pholatec.com
#
Rocotech International Ltd - Manufactures representative for fibre
optic and electro optic products. Includes product listings and
specifications, and links to suppliers.
Rocotech was founded in 1991 by Colin Thomas, as a sole UK agency for
Rodenstock Precision Optics in Germany Signaal USFA in Holland,
Cryotechnologies in France and Brimrose corporation from the USA. The
main aim of the company was to provide a local sales and technical
support contact for the products from these manufacturers.
It soon became evident that Rocotech's presence in the UK was winning
business for both its principals, especially in the defence and
military market, where Colin - an ex GEC manager - was particularly
experienced. The presence of a local contact for customers often
proved instrumental in gaining new orders.
Colin expanded the team at Rocotech and took on more suppliers,
notably Docter Optics GmbH, formerly Carl Zeiss Jena, who were based
in what was then East Germany and High Power Devices, a growing
American laser diode manufacturer.
As Rocotech's reputation grew more pricipals asked to come aboard. The
company expanded and Rocotech International Ltd was launched on 4th
April 2001 to address the European market. Rocotech International now
represent twelve world leaders in the fields of optics, electro-optics
and fibre optic communications.
*Rocotech
The New House
Windsor Road
Gerrards Cross
Bucks. SL9 7NF
UK
Tel: +44 (0) 1753 890809
Fax: +44 (0) 1753 890655
E-mail: websales@rocotech.co.uk
http://www.rocotech.co.uk
#
Sill Optics GmbH - Germany. Long established company producing wide
range of lenses and associated optoelectronic products for the laser,
measurement, and medical markets. Site incorporates detailed product
and application information.
We are a private owned medium sized company, specialieses in the
production of optical components in Germany. Since being founded in
1894 technical know how and flexibility in production have been the
basis for our 100-year old story of success.
With latest CAD and CNC equipment we can comply with any modern
requirements on optical manufacturing: from rapid prototyping with
highest precision to "off the shelf" components featuring high power
laser quality.
The product range covers optics for latest applications in medicine,
optoelectronics, metrology and laser.
*Sill Optics GmbH & Co. KG
Johann-Höllfritsch-Straße 13
D-90530 Wendelstein
Germany
Tel: +49 (0) 9129 / 9023-0
Fax: +49 (0) 9129 / 9023-23
E-mail: info@silloptics.de
http://www.silloptics.de
#
Stratton Technologies - Manufacturer's representative offering
precision motion systems and test solutions to the laser and photonics
industries.
Stratton Technologies offers a range of quality instruments and
components to both R&D labs and OEM users in the UK and Ireland. Our
products are primarily sourced from the laser and photonics industries
and serve a number of diverse application areas including:
Laser and optical laboratories
Life Sciences - cell manipulation, microscopy
Precision motion control
Fibre Optics.
Our product ranges are chosen to complement each other which enables
us to offer complete solutions to your application problems including
system design, software development and integration.
*Stratton Technologies Limited
P.O Box 82
Biggleswade
Bedfordshire SG18 8ZN
UK
Tel: +44 (0) 870 7606528
Fax: +44 (0) 870 0116275
E-mail: sales@strattontechnologies.co.uk
http://strattontechnologies.co.uk
Internet guide
Art
| Business | Computer | Debt | Domain names | Finance | Health | Games | Home | Insurance | Jobs | Mortgage | News | Recreation | Science | Shopping
Sports | Travel | Webhosting | Webmasters
